Grenkago ENFRAR
Home / FCC Compliance

FCC Part 15 Subpart B — SDoC, Not an FCC ID

One line: The FCC route for these models is a Supplier's Declaration of Conformity (SDoC) under Part 15 Subpart B — not an FCC ID, and we never state it as one.
Front three-quarter view of an inverter with the LCD panel
A unit from the covered model list, front three-quarter — the SDoC route is declared in the documents, not marked on the unit.
Rear rating label of an inverter showing the declaration-of-conformity statement
FCC compliance for these models is by Supplier’s Declaration of Conformity — there is no FCC ID on the unit or the label.

FCC documents held

DocumentNumberIssuing bodyDate
FCC SDoC certificateCKEYS251013025Guangdong KEYS Testing Technology Co., Ltd.2025-10-13
FCC SDoC test reportRKEYS250916316 (25 pages)Guangdong KEYS Testing Technology Co., Ltd.Test 2025-09-16 → 22

Certification route

The route is SDoC — Supplier's Declaration of Conformity, under CFR 47 FCC Part 15 Subpart B, tested to ANSI C63.4-2014.

SDoC is not Certification. It carries no FCC ID. Devices approved through the certification route receive an FCC ID; devices declared through SDoC do not. We therefore describe these models as "FCC Part 15 Subpart B compliant (SDoC)" and no other way.

Test results

TestFCC rule partResult
Conducted Emission15.107PASS
Radiated Emission15.109PASS

Main test article: HE200-7200-F. Rated conditions in the report: AC 90–280 V, 50/60 Hz, 26 A, 6 kW. The remaining models are covered by the series model list.

Covered models (23)

HE200-2500-O · HE200-4200-T · HE200-4200-T-I5 · HE200-6500-F · HE200-6500-FP
HE200-6500-FP-I5 · HE200-6500-T · HE200-6500-T-I5 · HE200-7200-F · HE200-7200-F-I5
HE200-7200-FP · HE200-12000-F · HE200-12000-F-I5
HE300-12000-F · HE300-12000-F-I5 · HE300-12000-FP · HE300-12000-FP-I5
HE500-2500-O · HE500-4200-T · HE500-6500-F · HE500-7200-F · HE500-12000-F
Note: HE300-7200-F and HE310-5000-F are not in the FCC list. Those two models have CE EMC coverage and GB 4943.1 safety coverage, but no FCC file.

What SDoC covers and what it does not

It covers: electromagnetic emissions from the equipment under Part 15 Subpart B — the requirement for a device not to cause harmful interference.

It does not cover:

Reading the main test article correctly

The report's main test article is HE200-7200-F, and the other 22 models are listed in the series model list with the declaration that they share the same circuit principle, safety structure and critical components. This is the standard series-approval approach.

Practical consequence: if a buyer asks whether a specific I5 or HE500 model was individually tested, the accurate answer is that it is covered by series declaration, not individually tested. We state it that way.

Verifying the file

The report carries the testing laboratory's details and report number RKEYS250916316. Buyers can contact Guangdong KEYS Testing Technology Co., Ltd. to confirm the report.

Which models this applies to

Model groupFCC SDoC
HE200 series (all listed variants)Covered
HE500 seriesCovered
HE300-12000-F and variantsCovered
HE300-7200-FNot covered — CE EMC + GB 4943.1 only
HE310-5000-FNot covered — CE EMC + GB 4943.1 only

Related pages

Request the FCC report