Grenkago ENFRAR
Home / L2-N1T-500

L2-N1T-500 — Portable Power Station, 1 kWh

One line: A 1 kWh portable station with 500 W AC output, LiFePO4 cells rated for 6000+ cycles, charged from solar or mains, with app control.
L2-N1T-500 portable all-in-one energy storage unit shown three-quarter, white case with the dark connection panel and a green accent band
L2-N1T-500 three-quarter — LiFePO4 cell, MPPT, inverter and AC output in one portable enclosure.
Connection panel of the L2-N1T-500 all-in-one unit showing DC inputs, AC outlets and the LCD
L2-N1T-500 — portable all-in-one: LiFePO4 cell, MPPT, inverter and AC output in one enclosure.

Specifications — cell DC

ItemValue
Rated input voltage3.2 Vdc
Input voltage range2.5–3.65 Vdc
Under-voltage protection2.4 ± 0.5 Vdc (2 s delay, low-voltage shutdown)
Over-voltage protection3.8 ± 0.5 Vdc (2 s delay, over-voltage protection)
No-load consumption≤15 W
Rated output voltage3.2 Vdc
Rated charge efficiency≥86%
Charge current protection240 A ± 10 A
Battery capacity1004.8 Wh (≈1 kWh)

Specifications — PV input

ItemValue
Max PV power500 W
PV input voltage range12–60 Vdc
PV input current range0–18 A
PV under-voltage protection11 ± 0.5 Vdc
PV over-voltage protection62 ± 1 Vdc

Specifications — utility input

ItemValue
Rated input voltage230 Vac
Rated input current5 A
Input voltage range170–280 Vac
Input frequency range45–65 Hz
Max charging power500 W
Power factor≥0.98

Specifications — AC output

ItemValue
Rated output voltage230 Vac
Output voltage range220–240 Vac
Rated output power500 W
Output frequency50/60 Hz
Output efficiency≥87%
Output waveformStandard sine wave

Specifications — general

ItemValue
Dimensions282 × 160 × 186 mm
Packing dimensions356 × 234 × 274 mm
Net weight10.11 kg
Gross weight10.86 kg

Operation

FunctionAction
Power onHold POWER/KEY for >2 s
Power offShort press, or hold for >1 s

Charge indicator: 25% / 50% / 75% / 100%. While charging, the charge icon flashes (0.5 s on, 0.5 s off). Below 1% charge, the red light flashes for 10 seconds and the system shuts down automatically. A solid red light indicates output fault protection — restart to reset.

Features

Side view of the L2-N1T-500 showing the carry handle and cooling fan
Side view — carry handle and cooling fan.
Battery connection cable supplied with the L2-N1T-500 portable energy storage unit
Supplied battery connection cable.

Where it fits

The 1 kWh capacity at 500 W output suits:

It is not a home backup unit — 500 W and 1 kWh cover small, short-duration loads. For that, see the all-in-one energy storage range.

Connections, monitoring and accessories

Terminal layout, system wiring, monitoring options and the accessories supplied with the unit.

Dual-port synchronous charging diagram for the L2-N1T-500, showing PV and grid input charging at the same time
Dual-port synchronous charging — PV and grid input charging the unit at the same time.
Cooling section of the L2-N1T-500 with the ventilation grille and fan
Cooling — ventilation grille and fan on the L2-N1T-500.
Product features diagram for the L2-N1T-500: plug-in terminal block, drainage holes and power distributor housing
Product features — plug-in terminal block, drainage holes and power distributor housing.

Certification and transport

CertificationStatus
CE / FCC / RoHSNot held
UN38.3Not held

No certification files are held for this model, and no UN38.3 report. Because it contains a lithium cell, UN38.3 is required for air and sea transport booking. Confirm shipping arrangements before ordering — see the certifications page.

Related models

Request a quotation